Epson PhotoPC User Manual - Page 55

6 Press down on the module until it snaps into the retaining clips at the sides of the socket. retaining clip 7 Place the socket cover on the camera body and press down until it snaps into place. You'll see the camera's expanded capacity reflected in the control panel (number of pictures remaining) when you take your first picture. With expanded memory, you may notice a delay between the time you press the shutter button and when the camera beeps. You can reduce this delay by pressing the button down halfway, holding it as long as necessary, and then pressing it down the rest of the way when you're ready to take the picture. Using the AC Adapter The AC adapter (A882421, model PCDC002) allows you to connect your PhotoPC camera to a standard electrical outlet. This is especially useful when you are transferring pictures and operating the camera from your computer. The adapter powers the camera, but does not charge the batteries. 8 Replace the batteries in the battery compartment and replace the battery cover. A B A-3