Epson PowerLite 4300 User's Guide - Page 20
Connecting a Composite Video Source, instructions on turning on the projector and
View all Epson PowerLite 4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
note If the video cable was not provided with your video device, you can purchase one from an electronics dealer. Connecting a Composite Video Source 1. If your cable has a bayonet connector (BNC), connect it to the Video1 connector on the projector. 2. When you've finished making any connections, see page 23 for instructions on turning on the projector and Chapter 2 for instructions on displaying and adjusting the image. 20 Setting Up the Projector
20
Setting Up the Projector
Connecting a Composite Video Source
1.
If your cable has a bayonet connector (BNC), connect it to the
Video1
connector on the projector.
2.
When you’ve finished making any connections, see page 23 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
note
If the video cable was not
provided with your video
device, you can purchase one
from an electronics dealer.