Epson PowerLite 4300 User's Guide - Page 24
end into an electrical outlet., Plug one end of the power cord into the projector, and the other
View all Epson PowerLite 4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Follow these steps to turn on the projector: 1. Remove the lens cover. note You can set the projector to automatically turn off the lamp and enter "sleep mode" when it has not received any signals for 1 to 30 minutes (see page 67 to enable, disable, or adjust this setting). This conserves electricity, cools the projector, and extends the life of the lamp. If you want to start projecting again, press the P power button. If you are done using the projector, unplug the power cord. 2. Plug one end of the power cord into the projector, and the other end into an electrical outlet. The Ppower light turns orange. Power light 24 Setting Up the Projector
24
Setting Up the Projector
Follow these steps to turn on the projector:
1.
Remove the lens cover.
2.
Plug one end of the power cord into the projector, and the other
end into an electrical outlet.
The
P
power light turns orange.
note
You can set the projector to
automatically turn off the
lamp and enter “sleep mode”
when it has not received any
signals for 1 to 30 minutes
(see page 67 to enable,
disable, or adjust this
setting). This conserves
electricity, cools the
projector, and extends the
life of the lamp. If you want
to start projecting again,
press the
P
power button. If
you are done using the
projector, unplug the power
cord.
Power light