Epson PowerLite 4300 User's Guide - Page 45
Using the Projector on a Network, If your network assigns addresses automatically, turn on
View all Epson PowerLite 4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
5. Choose Wired LAN and press Enter. You see the following screen: 6. Do one of the following: ■ If your network assigns addresses automatically, turn on the DHCP setting. ■ If your network does not assign addresses automatically, turn off DHCP and enter the projector's IP Address, Subnet Mask, and Gateway Address. To enter numbers, use the pointer button on the remote control to highlight the number you want to input, then press the Enter button. 7. Press Menu to exit. Using the Projector on a Network 45
Using the Projector on a Network
45
5.
Choose
Wired LAN
and press
Enter
. You see the following
screen:
6.
Do one of the following:
■
If your network assigns addresses automatically, turn on the
DHCP
setting.
■
If your network does not assign addresses automatically, turn
off
DHCP
and enter the projector’s
IP Address
,
Subnet
Mask
, and
Gateway Address
.
To enter numbers, use the
pointer button on the remote
control to highlight the number you want to input, then press
the
Enter
button.
7.
Press
Menu
to exit.