Epson PowerLite 4300 User's Guide - Page 31

Using Keystone Correction

Get Epson PowerLite 4300 PDF manuals and user guides View all Epson PowerLite 4300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

You see this screen: 5. Use the pointer button on the remote control (or the arrow buttons on the projector) to select the corner you want to adjust, and press Enter. 6. Use the pointer button on the remote control (or the arrow buttons on the projector) to adjust the shape, then press Esc when you are finished. 7. Repeat steps 5 and 6 as needed to adjust the other corners. 8. When you're done, press Esc to exit. Using Keystone Correction You can manually adjust the shape of the image to compensate for vertical and horizontal keystone distortion. Before performing horizontal or vertical keystone, use the lens shift function to horizontally center the lens and vertically move the lens to the top or bottom (see page 29); otherwise, the distortion will not be corrected accurately. Also, the distortion may not be corrected accurately for some zoom settings. 1. Press the Menu button on the remote control or projector. 2. Select the Settings menu and press Enter. 3. From the Settings menu, select Keystone and press Enter. 4. Select H/V-Keystone and press Enter. note To undo your Quick Corner adjustments, press and hold the Esc button for about 2 seconds, select Reset Quick Corner from the screen that appears, then press Enter. note Epson recommends using Quick Corner to accurately adjust keystone distortion. See page 30. note You can also use the projector's arrow buttons to perform keystone correction as long as the projector's Keystone setting is set to H/V-Keystone. Displaying and Adjusting the Image 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
Displaying and Adjusting the Image
31
You see this screen:
5.
Use the
pointer button on the remote control (or the arrow
buttons on the projector) to select the corner you want to adjust,
and press
Enter
.
6.
Use the
pointer button on the remote control (or the arrow
buttons on the projector) to adjust the shape, then press
Esc
when
you are finished.
7.
Repeat steps 5 and 6 as needed to adjust the other corners.
8.
When you’re done, press
Esc
to exit.
Using Keystone Correction
You can manually adjust the shape of the image to compensate for
vertical and horizontal keystone distortion.
Before performing horizontal or vertical keystone, use the lens shift
function to horizontally center the lens and vertically move the lens to
the top or bottom (see page 29); otherwise, the distortion will not be
corrected accurately. Also, the distortion may not be corrected
accurately for some zoom settings.
1.
Press the
Menu
button on the remote control or projector.
2.
Select the
Settings
menu and press
Enter
.
3.
From the Settings menu, select
Keystone
and press
Enter
.
4.
Select
H/V-Keystone
and press
Enter
.
note
To undo your Quick Corner
adjustments, press and hold
the
Esc
button for about 2
seconds, select
Reset Quick
Corner
from the screen that
appears, then press
Enter
.
note
Epson recommends using
Quick Corner to accurately
adjust keystone distortion.
See page 30.
note
You can also use the
projector’s arrow buttons to
perform keystone correction
as long as the projector’s
Keystone setting is set to
H/V-Keystone
.