Epson PowerLite 4300 User's Guide - Page 79
warning, 463-7766. Request part number V13H010L62 PowerLite
View all Epson PowerLite 4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
It is time to replace the lamp when: ■ The projected image gets darker or starts to deteriorate. ■ The message Replace the lamp appears on the screen when the lamp comes on. ■ The Lamp light flashes orange. To maintain projector brightness and image quality, replace the lamp as soon as possible. You may also need to replace the lamp if the red. See page 87. Lamp light flashes note Epson recommends that you clean the air filter whenever you replace the lamp. Lamp light Contact your dealer or call Epson at 800-GO-EPSON (800-463-7766). Request part number V13H010L62 (PowerLite 4100) or V13H010L63 (PowerLite 4200W and 4300). Follow these steps to replace the lamp: 1. Press the Ppower button on the back of the projector to turn it off. After the projector beeps twice, unplug the power cord. 2. Let the projector cool for at least an hour (if it has been on). The lamp is extremely hot immediately after use. warning Let the lamp cool fully before replacing it. In the unlikely event that the lamp has broken, small glass fragments may be present and should be removed carefully to avoid injury. If the projector has been installed on the ceiling, you should stand to the side of the lamp cover, not underneath it. If the lamp is used after the replacement period has passed, the possibility that the lamp may break increases. When a lamp replacement message appears, replace the lamp with a new one as soon as possible, even if it is still working. Maintaining the Projector 79