Epson PowerLite 50c User Manual - Page 21
Connecting to a Macintosh Desktop Computer
View all Epson PowerLite 50c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Connecting to a Macintosh Desktop Computer To connect the projector to your desktop Macintosh, you need to use the computer cable. If you'll be using the remote control as a wireless mouse, you need to connect a mouse cable. If you'll be using audio through the projector's speakers, you need to connect an audio cable. Connecting the Computer Cable Before you start, turn off the projector and computer. 1. Disconnect the monitor cable from the video (monitor) port on the back of the Macintosh. 2. Connect one end of the computer cable to the projector's Computer port. 3. Connect the other end of the computer cable the video (monitor) port on the Macintosh. 4. Tighten the screws on the connectors. If you don't need to make any other connections, you can plug in and turn on your equipment; see page 21 for instructions. 16 Setting Up the Projector