Epson PowerLite 50c User Manual - Page 26

Connecting to External Speakers or a PA System

Get Epson PowerLite 50c PDF manuals and user guides View all Epson PowerLite 50c manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

Connecting to External Speakers or a PA System The projector's speaker is loud enough for most small- or medium-size rooms. For large rooms or maximum volume, you can connect the projector to external speakers or a public address (PA) system. You'll need an RCA-to-3.5mm stereo audio cable, which may be included with your sound system or may be purchased from an electronics store. Before you start, make sure the projector and speakers or PA system are turned off. 1. Connect the cable's 3.5 mm stereo miniplug to the projector's Audio Out jack. note The projector's internal speaker is disabled when you use an external audio system. 2. Connect the RCA plugs to the speaker or PA system. Insert the cable's red plug into the Audio R jack and the white plug into the Audio L jack. Setting Up the Projector 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Setting Up the Projector
21
Connecting to External Speakers or a PA
System
The projector
’
s speaker is loud enough for most small- or medium-size
rooms. For large rooms or maximum volume, you can connect the
projector to external speakers or a public address (PA) system.
You
’
ll need an RCA-to-3.5mm stereo audio cable, which may be
included with your sound system or may be purchased from an
electronics store.
Before you start, make sure the projector and speakers or PA system
are turned off.
1.
Connect the cable
’
s 3.5 mm stereo miniplug to the projector
’
s
Audio Out
jack.
2.
Connect the RCA plugs to the speaker or PA system. Insert the
cable
’
s red plug into the Audio R jack and the white plug into the
Audio L jack.
note
The projector
’
s internal
speaker is disabled when you
use an external audio system.