Epson PowerLite 50c User Manual - Page 34
Adjusting the Image Height, caution
View all Epson PowerLite 50c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Adjusting the Image Height If your image is too low, you can raise it by extending the projector's feet. 1. Stand behind the projector. Pull up the blue foot release levers and lift the front of the projector. This unlocks the feet. caution To avoid damaging the lens, do not lift the projector by the lens. 2. Raise or lower the front of the projector as necessary. 3. Once the image is positioned where you want it, release the levers to lock the feet into position. 4. To fine-tune the height, rotate the feet clockwise to raise the projector and counterclockwise to lower it. note If the image shape is not square after adjusting its position, see the next section for a solution. clockwise to raise it counterclockwise to lower it Using the Projector 29