Epson PowerLite 50c User Manual - Page 50

Chap 4-Maintaining and Transporting the Projector

Get Epson PowerLite 50c PDF manuals and user guides View all Epson PowerLite 50c manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

4Maintaining and Transporting the Projector warning Before you clean any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except the lamp cover. Dangerous electrical voltages in the projector can injure you severely. Do not try to service this product yourself, except as specifically explained in this User's Guide. Refer all other servicing to qualified service personnel. Your projector needs little maintenance. All you need to do on a regular basis is keep the lens clean. Any dirt or smears on the lens will show up on your projected image. You also need to periodically clean the air intake vent on the side of the projector. A clogged vent can block ventilation needed to cool the projector and keep it from overheating. The only parts you should replace are the lamp and air intake vent (if necessary). If any other part needs replacing, contact your dealer or a qualified service person. This chapter covers the following: s Cleaning the lens s Cleaning the projector case s Cleaning the air intake vent s Replacing the lamp s Transporting the projector Maintaining and Transporting the Projector 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
4
Maintaining and Transporting the Projector
45
Maintaining and
Transporting the Projector
Your projector needs little maintenance. All you need to do on a
regular basis is keep the lens clean. Any dirt or smears on the lens will
show up on your projected image.
You also need to periodically clean the air intake vent on the side of
the projector. A clogged vent can block ventilation needed to cool the
projector and keep it from overheating.
The only parts you should replace are the lamp and air intake vent (if
necessary). If any other part needs replacing, contact your dealer or a
qualified service person.
This chapter covers the following:
■
Cleaning the lens
■
Cleaning the projector case
■
Cleaning the air intake vent
■
Replacing the lamp
■
Transporting the projector
warning
Before you clean any part of
the projector, turn it off and
unplug the power cord. Never
open any cover on the
projector, except the lamp
cover. Dangerous electrical
voltages in the projector can
injure you severely. Do not
try to service this product
yourself, except as specifically
explained in this
User
’
s
Guide
. Refer all other
servicing to qualified service
personnel.