Epson PowerLite Pro Cinema 6010 User's Guide - Page 20
Installing Batteries in the Remote Control, Turning the Projector On and Off, Turning On the Projector - s new
View all Epson PowerLite Pro Cinema 6010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Installing Batteries in the Remote Control The remote control uses two AA batteries. Warning: Keep batteries away from children. If a battery is swallowed, contact your doctor immediately. 1. Release the tab and lift open the cover. 2. Insert two new AA batteries as shown. 3. Reinsert the cover and press it down until it clicks into place. Aim the remote control at the screen, or at the front or back of the projector. Make sure you are within 32 feet (10 meters) of the projector. If you suspect the batteries are weak, press the illumination button. If the buttons do not glow, replace the batteries. Turning the Projector On and Off Turning On the Projector 1. Turn on the power switch on the back of the projector. 2. Turn on any connected equipment you plan to use. 3. Press the On button on the remote control or the Ppower button on the projector. Remote control Projector Note: To prevent children from turning on the projector, you can use the Child Lock feature. See page 32 for details. If you'll be using the projector at an altitude above 4921 feet (1500 meters), turn on High Altitude Mode so the fan can properly cool the projector at the high altitude air pressure. See page 51 for details. 20 Setting Up the Projector