Epson PowerLite Pro Cinema 6010 User's Guide - Page 61
Resetting the Lamp Usage Timer, Checking the Projector Status
View all Epson PowerLite Pro Cinema 6010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
10. Tighten the lamp cover screw. 11. Reset the lamp usage timer, as described on page 61. Resetting the Lamp Usage Timer After replacing the lamp, plug the projector back in, turn on the power switch on the back of the projector, and press the Ppower button on the projector or the On button on the remote control. Then follow these steps to reset the lamp usage timer: 1. Press the Menu button on the projector or remote control. 2. Use the menu navigation buttons to open the Reset menu, then select Reset Lamp Hours. 3. When you see a confirmation prompt, highlight Yes and press the Enter button. 4. When you're finished, press the Menu button to exit. The lamp usage timer shows 0H until you've used the lamp for at least 10 hours. Checking the Projector Status You can use the Info menu to view information about the current display settings and how long the projection lamp has been in use. To access the Info menu: 1. Press the Menu button on the projector or remote control. Maintenance 61