Epson PowerLite Pro Cinema 6010 User's Guide - Page 64

Lights indicating a problem, Lights indicating normal operation, Problem Solving, High Altitude Mode

Get Epson PowerLite Pro Cinema 6010 PDF manuals and user guides View all Epson PowerLite Pro Cinema 6010 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

Lights indicating normal operation Light state Cause and solution Power light flashes blue, power button is on The projector is warming up. Wait for the picture to appear. The projector is cooling down. Wait until the power light stops flashing and remains off. Then press the Ppower button on the projector or the On button on the remote control to turn it back on. Power light and power button are on Projection is in progress. Lights indicating a problem Light state Cause and solution All lights are off The projector is not receiving power. Make sure the power cord is connected securely at both ends. The temperature light flashes orange High-speed cooling is in progress. If the temperature rises further, projection will stop automatically. Make sure there is plenty of space around the projector for ventilation. Clean or replace the air filter if necessary (see page 56). If you are using the projector at an altitude above 4921 feet (1500 meters), turn on High Altitude Mode so the fan can cool the projector properly (see page 51). The temperature light is red The projector is too hot, which turns off the lamp automatically. Let the projector cool for five minutes, then turn it back on. Make sure there is plenty of space around the projector for ventilation. Also, clean or replace the filter if necessary (see page 56). If you are using the projector at an altitude above 4921 feet (1500 meters), turn on High Altitude Mode so the fan can cool the projector properly (see page 51). The lamp light flashes orange The lamp needs to be replaced. The lamp light flashes red There is a problem with the lamp. If you just replaced the lamp, make sure the lamp and its cover are securely installed (see page 58). Turn off the projector and unplug it from the electrical outlet. Wait for the lamp to cool, then remove the lamp and check it for cracks. If the lamp isn't cracked, reinstall it, plug the projector into an outlet, and turn the power on. If this doesn't fix the problem, or if the lamp is cracked, contact Epson for assistance (see page 70). 64 Problem Solving

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
64
Problem Solving
Power light flashes
blue, power button
is on
The projector is warming up. Wait for the picture to appear.
The projector is cooling down. Wait until the power light stops
flashing and remains off. Then press the
P
power button on the
projector or the
On
button on the remote control to turn it back
on.
Power light and
power button are
on
Projection is in progress.
Lights indicating a problem
Light state
Cause and solution
All lights are off
The projector is not receiving power. Make sure the power cord is
connected securely at both ends.
The temperature
light flashes
orange
High-speed cooling is in progress. If the temperature rises
further, projection will stop automatically. Make sure there is
plenty of space around the projector for ventilation. Clean or
replace the air filter if necessary (see page 56).
If you are using the projector at an altitude above 4921 feet (1500
meters), turn on
High Altitude Mode
so the fan can cool the
projector properly (see page 51).
The temperature
light is red
The projector is too hot, which turns off the lamp automatically.
Let the projector cool for five minutes, then turn it back on. Make
sure there is plenty of space around the projector for ventilation.
Also, clean or replace the filter if necessary (see page 56).
If you are using the projector at an altitude above 4921 feet (1500
meters), turn on
High Altitude Mode
so the fan can cool the
projector properly (see page 51).
The lamp light
flashes orange
The lamp needs to be replaced.
The lamp light
flashes red
There is a problem with the lamp. If you just replaced the lamp,
make sure the lamp and its cover are securely installed (see
page 58). Turn off the projector and unplug it from the electrical
outlet. Wait for the lamp to cool, then remove the lamp and check
it for cracks. If the lamp isn’t cracked, reinstall it, plug the
projector into an outlet, and turn the power on. If this doesn’t fix
the problem, or if the lamp is cracked, contact Epson for
assistance (see page 70).
Lights indicating normal operation
Light state
Cause and solution