Epson PowerLite Pro Cinema 6010 User's Guide - Page 51
to transmit a, port output a 12-volt signal max. 200 mA
View all Epson PowerLite Pro Cinema 6010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
■ High Altitude Mode Extended > Operation > High Altitude Mode Adjusts the speed of the fan so it can properly cool the projector at higher altitudes. Turn this setting on if you are using the projector at an altitude of 4921 feet (1500 meters) or higher. Note: The maximum operating altitude is 7500 feet (2286 meters). ■ Trigger Out Extended > Operation > Trigger Out Turn on this setting to have the Trigger out port output a 12-volt signal (max. 200 mA) to lower your projection screen when the projector is running. Select Power to transmit a signal when your projector is turned on, or Anamorphic Wide to engage a motorized anamorphic lens (commercially available) when that aspect ratio is selected. Note: If you change this setting, the new setting will take effect the next time you turn the projector on. Making Detailed Adjustments 51