Epson Stylus Pro User Manual - Page 18

Loading Oversized Paper, Setup and Software Guide

Get Epson Stylus Pro - Stylus Color Pro Ink Jet Printer PDF manuals and user guides View all Epson Stylus Pro manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

8. Change the Media Type and other printer driver settings so they are appropriate for the paper you loaded. (See your Setup and Software Guide for instructions.) Loading Oversized Paper If you are loading paper that is larger than the paper tray, you need to pull out the paper tray extension. Follow these steps: 1. Remove the output tray and remove any paper in the paper tray. 2. The paper tray extension acts as the rear edge guide, so make sure the built-in rear edge guide is folded down as shown in the illustration below. paper tray extension 3. Gently pull the extension out using both hands-one to hold the paper tray in position and the other to pull out the extension. 4. Load the stack of paper in the tray and then slide in the extension until it meets the edge of the paper stack. 1-6 Paper Handling

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
8.
Change the Media Type and other printer driver settings
so they are appropriate for the paper you loaded. (See your
Setup and Software Guide
for instructions.)
Loading Oversized Paper
If you are loading paper that is larger than the paper tray, you
need to pull out the paper tray extension. Follow these steps:
1.
Remove the output tray and remove any paper in the paper
tray.
2.
The paper tray extension acts as the rear edge guide, so
make sure the built-in rear edge guide is folded down as
shown in the illustration below.
3.
Gently pull the extension out using both hands—one to
hold the paper tray in position and the other to pull out the
extension.
4.
Load the stack of paper in the tray and then slide in the
extension until it meets the edge of the paper stack.
paper tray
extension
1-6
Paper Handling