Epson Z9870UNL User Manual - Page 170
Communication Off, Extron XTP
View all Epson Z9870UNL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
Setting Standby Mode HDBaseT Multi-Projection Lamp Select Options Communication On Communication Off Control Communications Extron XTP - Dual Single Lamp1 Lamp 2 Description Enable this setting to allow the following operations to occur when the projector is in standby mode: • Monitor and control the projector over a network • Output audio and video to an external device (A/V Output must be set to Always On) • Communication from the HDBaseT port Selects the communication settings when you connect the projector to an HDBaseT Transmitter or switcher Control Communications: enables or disables communication from the Ethernet and serial ports on the HDBaseT transmitter; also disables the projector's LAN, RS-232C, and Remote ports Extron XTP: set to On when you connect the Extron XTP transmitter or switcher to the HDBaseT port See the Multi-Projection settings table in this topic Select the lamps to be turned on 170