Garmin G3X Pilots Guide - Page 120

Overview System Instruments Flight EIS CNS Interface GPS Navigation EIS Resetting the Fuel Used to zero and Fuel Remaining to full tanks:  Press the RESET Softkey; this resets Fuel Used to zero and Fuel Remaining to the maximum fuel capacity for the aircraft Resetting Fuel Remaining only:  Press Softkey #2 (XX GAL); this resets only Fuel Remaining to the maximum fuel capacity for the aircraft. XX is the airframe specific full fuel quantity. Resetting Fuel Remaining to partial fuel quantities (optional):  Press Softkey #3 or #4 (XX GAL); this resets fuel remaining to a partial tank quantity (i.e., filler neck tab). XX is the airframe specific partial fuel quantity (if configured). 3.4 CAS MESSAGES (OPTIONAL) The CAS messages displayed depend upon the current configuration, and will vary from the examples listed below. Refer to the G3X Installation Manual for more information on configuring CAS messages (if applicable). CAS Messages are grouped by criticality (warning, caution, advisory). The color of the message is based on its urgency and on required action: • WARNING (red): Requires immediate attention. Warning messages will flash until acknowledged by pressing the ENT Key. • CAUTION (yellow): Requires pilot awareness and possible future corrective action. • ADVISORY (white): Provides general information. Warning annunciation text is shown in red in the CAS Annunciation Window on the full-screen PFD and/or the split-screen PFD Page (dependent on number of CAS messages configured). The CAS Annunciation Window is located to the right of the Horizontal Situation Indicator. Flight Planning Hazard Avoidance Additional Features Integrated Autopilot Annun/Alerts Appendix Index 102 Garmin G3X Pilot's Guide 190-01115-00 Rev. F