Garmin G3X Pilots Guide - Page 153
Selecting a runway, If duplicate entries exist for the entered facility name or location
View all Garmin G3X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
System Overview Flight Instruments EIS CNS Interface GPS Navigation If duplicate entries exist for the entered facility name or location, additional entries may be viewed by continuing to turn the FMS Joystick during the selection process. If duplicate entries exist for an identifier, a Duplicate Waypoints Window is displayed. Press the ENT Key to move the cursor to the Duplicate Waypoints Window. Duplicate Waypoints Window Waypoint Information Window-Duplicate Identifier Selecting a runway: 1) With the Waypoint (WPT) Page displayed, press the INFO Softkey. 2) Press the FMS Joystick to activate the cursor. 3) Turn the FMS Joystick clockwise to begin entering a waypoint identifier for the desired runway (turning it counter-clockwise brings up the waypoint selection submenu - press the CLR Key or the FMS Joystick to remove it), or move the FMS Joystick to select the facility name, or city field. 4) Press the ENT Key. Full-Screen: continue to Step 7. 5) Press the RUNWAY Softkey (split-screen only). 6) Press the FMS Joystick to activate the cursor (split-screen only). 7) Move the FMS Joystick to place the cursor in the 'Runway' Box, on the runway designator. GPS Navigation Flight Planning Hazard Avoidance Additional Features Integrated Autopilot Annun/Alerts Appendix Index Runways Box (Waypoint Page) 190-01115-00 Rev. F Garmin G3X Pilot's Guide 135