Garmin G3X Pilots Guide - Page 63
Transponder, Restoring system setting defaults, Setting the Flight ID - ads b
View all Garmin G3X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
System Overview Flight Instruments EIS CNS Interface GPS Navigation Flight Planning System Overview Restoring system setting defaults: 1) Press the MENU Key twice to display the Main Menu. 2) Turn or move the FMS Joystick to highlight 'System Setup...' and press the ENT Key. 3) Turn or move the FMS Joystick to highlight the desired menu option (Data Bar Fields, Display, Date & Time, Position, or Alarms), and press the ENT Key. 4) Press the MENU Key. 5) With 'Restore Default' highlighted press the ENT Key. TRANSPONDER If configured to 'Set By Pilot' in configuration mode, (refer to the Installation Manual for configuration information) the pilot can change the Flight ID and enable/disable ADS-B Transmit from the Transponder Setup Page. Setting the Flight ID: 1) Press the MENU Key twice to display the Main Menu. 2) Turn or move the FMS Joystick to highlight 'System Setup...' and press the ENT Key. 3) Turn or move the FMS Joystick to highlight 'Transponder', and press the ENT Key. 4) Move the FMS Joystick to highlight the 'Flight ID' Field. 5) Use the FMS Joystick to enter the desired Flight ID and press the ENT Key. Enabling/disabling ADS-B Transmit: 1) Press the MENU Key twice to display the Main Menu. 2) Turn or move the FMS Joystick to highlight 'System Setup...' and press the ENT Key. 3) Turn or move the FMS Joystick to highlight 'Transponder', and press the ENT Key. 4) Move the FMS Joystick to highlight the 'ADS-B Transmit' Field. 5) Turn the FMS Joystick to highlight 'Enabled' or 'Disabled'. 6) Press the FMS Joystick, the CLR Key, the EXIT Softkey or the MENU Key to return to the previous page. Hazard Avoidance Additional Features Integrated Autopilot Annun/Alerts Appendix Index 190-01115-00 Rev. F Garmin G3X Pilot's Guide 45