Garmin G3X Pilots Guide - Page 66
Display, Adjusting backlight intensity - can bus installation
View all Garmin G3X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Overview System Instruments Flight EIS CNS Interface GPS Navigation System Overview DISPLAY The Backlight Intensity (display brightness) can be set to 'Auto' or 'Manual'. 'Auto' sets the Backlight Intensity based on the aircraft's instrument lighting bus voltage. With 'Manual' selected, the pilot can manually adjust the desired backlight intensity (1-10). After each power cycle the Backlight Intensity is set to the default, which is configurable. Refer to the G3X Installation Manual for more information. 'EIS Display Location' Menu Option Display Setup Page Adjusting backlight intensity: 1) Press the MENU Key twice to display the Main Menu. 2) Turn or move the FMS Joystick to highlight 'System Setup...' and press the ENT Key. 3) Turn or move the FMS Joystick to highlight 'Display', and press the ENT Key. 4) Turn the FMS Joystick to highlight 'Auto'. Or: a) Turn the FMS Joystick to highlight 'Manual'. b) Move the FMS Joystick to highlight the desired Backlight Intensity (1-10). 5) Press the FMS Joystick, the CLR Key, the EXIT Softkey or the MENU Key to return to the previous page. Flight Planning Hazard Avoidance Additional Features Integrated Autopilot Annun/Alerts Appendix Index 48 Garmin G3X Pilot's Guide 190-01115-00 Rev. F