Garmin G3X Pilots Guide - Page 67
COLOR MODE, EIS DISPLAY LOCATION OPTIONAL, Adjusting the color mode
View all Garmin G3X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
System Overview Flight Instruments EIS CNS Interface GPS Navigation System Overview COLOR MODE The Color Mode setting is used to adjust the color brightness used on the map and synthetic vision display for day or night use. Adjusting the color mode: 1) Press the MENU Key twice to display the Main Menu. 2) Turn or move the FMS Joystick to highlight 'System Setup...' and press the ENT Key. 3) Turn or move the FMS Joystick to highlight 'Display', and press the ENT Key. 4) Move the FMS Joystick to highlight the Color Mode field. 5) Turn the FMS Joystick to highlight 'Day', 'Night', or 'Auto'. 6) Press the FMS Joystick, the CLR Key, the EXIT Softkey or the MENU Key to return to the previous page. EIS DISPLAY LOCATION (OPTIONAL) In Configuration Mode the 'EIS Display Location' setting can be set to one of the following: • AUTO-Displays the EIS Strip on the MFD, or on the PFD1 (and PFD2 if applicable) if the MFD is not displayed. • PFD-Always displays the EIS Strip on PFD1 (and PFD2 if applicable). • User Selected-Enables the user to choose between 'AUTO' and 'PFD' via the Display Setup menu. For more information on how to enable the 'EIS Display Location' setting in Configuration Mode refer to the G3X Installation Manual. Flight Planning Hazard Avoidance Additional Features Integrated Autopilot Annun/Alerts Appendix Index 190-01115-00 Rev. F Garmin G3X Pilot's Guide 49