Garmin G3X Pilots Guide - Page 224
Dedicated Traffic TRF), Enabling/disabling traffic on the Synthetic Vision display - touch screen
View all Garmin G3X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 224 highlights
Overview System Instruments Flight EIS CNS Interface Hazard Avoidance Enabling/disabling traffic on the Synthetic Vision display: 1) From the full-screen PFD and/or the split-screen PFD Page, press the MENU Key. 2) Move the FMS Joystick to highlight the 'TRAFFIC' field. 3) Turn the FMS Joystick to highlight 'On' or 'Off'. DEDICATED TRAFFIC PAGE (TRF) Displaying/Removing the Traffic Page: 1) Press the MENU Key twice to display the Main Menu. 2) Turn or move the FMS Joystick to highlight 'System Setup...' and press the ENT Key. 3) Turn or move the FMS Joystick to highlight 'Display', and press the ENT Key. 4) Move the FMS Joystick to highlight the Traffic Page field. 5) Turn the FMS Joystick to highlight 'Show' or 'Hide'. 6) Press the FMS Joystick, the CLR Key, the EXIT Softkey or the MENU Key to return to the previous page. Disabling/Enabling the traffic alerts: NOTE: Traffic alerts are reset to 'enabled' on the next power cycle. 1) Display the dedicated Traffic (TRF) Page as decribed in the procedure above. 2) From the Traffic (TRF) Page touch the DISABLE Softkey to enable/disable traffic alerts. GPS Navigation Flight Planning Hazard Avoidance Additional Features Integrated Autopilot Annun/Alerts Appendix Index 206 Garmin G3X Pilot's Guide 190-01115-00 Rev. F