HTC Touch Diamond User Manual - Page 173

Experiencing Multimedia 173 • Touch and Press. Requires you to touch the ENTER button to activate the auto-focus; when focus is set, press the ENTER button to take the shot. • Touch. Requires you to touch the ENTER button to activate autofocus; when focus is set, Camera automatically takes the shot. • Full Press. Requires you to press the ENTER button to activate auto-focus; when focus is set, Camera automatically takes the shot. • Review Duration. Set a time length for displaying the captured image/video on the Review screen. Select No Limit if you do not want to impose a time limit. Select No Review to immediately return to the live Camera screen after capturing and saving. • Image Properties. This option lets you adjust the capture properties, such as Contrast, Saturation, and Sharpness. 1 Tap a property to adjust. 2 Tap to reset all properties to their default values. 3 Tap to save the settings. 1 4 Tap / or press NAVIGATION left/right 2 (Landscape orientation) to increase/decrease the value. 5 Tap to close the submenu 3 4 5 without applying and saving the changes. • Effect. Choose a special effect such as Grayscale, Sepia, or others, to apply to your photos or video clips. • Metering Mode. Select a metering mode to allow the camera to measure the amount of light and calculate the best-fit exposure value before capturing. Choose either Center Area to measure light using the center area of the subject, or Average to measure light using the area around the subject. • Prefix. When Default is selected as the prefix, the file name of each new captured file is set to "IMAGE" or "VIDEO" followed by a sequential