HP 2300d HP LaserJet 2300 printer - User Guide - Page 100

1 Print-cartridge area Jams in this area might result in loose toner on the page. If you get any toner on your clothes or hands, wash them in cold water. (Hot water will set the toner into the fabric.) 1 Open the top cover. 2 Remove the print cartridge. 2 CAUTION To prevent damage, do not expose the print cartridge to light for more than a few minutes. Place a piece of paper over the top of the print cartridge to shield it while it is out of the printer. 3 Carefully lift up the registration plate. If the leading edge of the print media is visible, gently pull the media toward the rear of the printer to remove it from the printer. 3 If the media is difficult to remove or has already entered the output area, remove the jam as described in "Output areas" on page 100. 4 When the jammed media has been removed, gently flip down the registration plate. Reinstall the print cartridge and shut the top cover. Note If the print cartridge is difficult to reinstall, make sure that the registration plate has been flipped back down into position and that you have pushed the print cartridge firmly in place. 4 If the ATTENTION light does not go out, jammed media remains inside the printer. Check the paper-feed and rear-output areas for jams. For printers that include a built-in duplexer (HP LaserJet 2300d printer, HP LaserJet 2300dn printer, and HP LaserJet 2300dtn printer), check the duplexer area. 98 Chapter 4 Problem solving ENWW