HP 2300d HP LaserJet 2300 printer - User Guide - Page 113
USB problems, Symptom, Possible cause, Solution, A USB-connected - printer $
UPC - 808736471091
View all HP 2300d manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Symptom Possible cause Solution USB problems A USB-connected HP LaserJet printer does not appear in the Macintosh Chooser. This problem is caused by either a software or hardware component. Software troubleshooting Make sure that your Macintosh computer supports USB. Make sure that your Macintosh computer has Mac OS 8.6 or later. Ensure that your Macintosh has the appropriate USB software from Apple. Note: The iMac and Blue G3 desktop Macintosh systems contain all the requirements to connect to a USB device. Hardware troubleshooting Make sure that the printer is turned on. Verify that the USB cable is properly connected. Make sure that you are using the appropriate high-speed USB cable. Make sure that there are not too many USB devices drawing power from the chain. Disconnect all devices from the chain and connect the cable directly to the USB port on the host computer. Check to see if there are more than two non-powered USB hubs in a row on the chain. Disconnect all devices from the chain and connect the cable directly to the USB port on the host computer. Note: The iMac keyboard is a non-powered USB hub. The LaserWriter driver does Use the Apple Desktop Utility to set up the not display USB devices in printer. the Chooser. ENWW Troubleshooting common Macintosh problems 111