HP 2300d HP LaserJet 2300 printer - User Guide - Page 87
computer. Print a job that you know, cable to attach it directly to - laserjet usb cable
UPC - 808736471091
View all HP 2300d manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Symptom The printer prints, but the text is wrong, garbled, or incomplete. Possible cause Solution The printer cable is loose or defective. Disconnect the printer cable and reconnect it. Try a print job that you know works. If possible, attach the cable and printer to another computer and try a print job that you know works. Finally, try a new cable. The printer is on a network or sharing device and is not receiving a clear signal. Disconnect the printer from the network and use a parallel or USB cable to attach it directly to a computer. Print a job that you know works. The wrong driver was selected in the software. Check the software's printer selection menu to make sure that an HP LaserJet 2300 series printer is selected. The software program is malfunctioning. Try printing a job from another program. ENWW Troubleshooting general printing problems 85