HP 2300d HP LaserJet 2300 printer - User Guide - Page 94
clear the error message. The, job will not be printed.
UPC - 808736471091
View all HP 2300d manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Message 22 EIO [X] BUFFER OVERFLOW alternates with To continue press 22 PARALLEL I/O BUFFER OVERFLOW alternates with To continue press 22 SERIAL I/O BUFFER OVERFLOW alternates with To continue press 22 USB I/O BUFFER OVERFLOW 40 EIO [X] BAD TRANSMISSION alternates with To continue press 41.X PRINTER ERROR alternates with To continue press Description Recommended action Too much data was sent to the EIO 1 Press (SELECT button) to card in the specified slot [X]. An clear the message. (The job will improper communications protocol not be printed.) might be in use. 2 Check the host configuration. If the message persists, contact an HP-authorized service or support provider (see "Contacting HP" on page 123). Too much data was sent to the parallel port. 1 Check for a loose cable connection and be sure to use a high-quality cable. Some non-HP parallel cables might be missing pin connections or might otherwise not conform to the IEEE-1284 specification. (See "Ordering parts, accessories, and supplies" on page 116.) 2 This error can occur if the driver you are using is not IEEE-1284 compliant. For best results, use an HP driver that came with the printer. (See "Printer software" on page 11.) 3 Press (SELECT button) to clear the error message. (The job will not be printed.) 4 If the message persists, contact an HP-authorized service or support provider (see "Contacting HP" on page 123). Too much data was sent to the serial port. Press (SELECT button) to clear the error message. (The job will not be printed.) Too much data was sent to the USB Press (SELECT button) to clear port. the error message. (The job will not be printed.) The connection has been broken between the printer and the EIO card in the specified slot [X]. Press (SELECT button) to clear the error message and continue printing. A temporary printing error occurred. 1 2 3 Press (SELECT button). The page containing the error automatically reprints if jam recovery is enabled. Turn the printer power off, and then turn the printer power on. If the message persists, contact an HP-authorized service or support provider (see "Contacting HP" on page 123). 92 Chapter 4 Problem solving ENWW