HP 2605 Service Manual - Page 162

Table 6-4 Extended print modes (continued) HP ToolboxFX extended print mode Printer adjustment Heavy coverage Fusing adjustment Toner offset Flap sealing Less fusing More fusing Dry paper Humid paper Rough paper Less transfer current More transfer current Less toner Fusing adjustment Fusing adjustment Fusing adjustment Fusing adjustment Transfer adjustment Transfer adjustment Transfer adjustment Transfer adjustment Transfer adjustment Toner adjustment Change in printer setting Increased fuser temperature for less positive paper curl with heavy toner coverage Reduced fuser temperature for less toner offset Reduced fuser temperature to keep envelope flaps from sealing Reduced fuser temperature Increased fuser temperature Increased transfer bias for high resistivity paper Decreased transfer bias for high resistivity paper Increased transfer bias for high resistivity paper Reduced transfer bias Increased transfer bias Tone curve is scaled back so that solid is not 100% halftone Print quality menu Under the Print Quality menu in HP ToolboxFX, there will be an Optimize section containing a number of On/Off adjustments which will apply to all media types. Table 6-5 Optimize menu Adjustment type Background Toner Default setting Off Extra Cleaning Off Trailing Edge Over? Off development (full?speed) Trailing Edge Over? Off development (half?speed) Mottle Prevention Off Less Duplex Transfer Current Off More Duplex Transfer Current Off Extended print mode EEC95-9 EEC93-11 EEC95-14 EEC95-14 EEC96-12 EEC68-10 EEC91>16h* EEC92>-1** EEC68-10 Description Will reduce the developer DC bias Increases rotations of the ETB Will increase the developer DC bias Decreases transfer bias on the 2nd side of duplex jobs. For media that has low resistivity after fusing. Increases transfer bias on the second side of duplex 152 Chapter 6 Troubleshooting ENWW