HP 2605 Service Manual - Page 178
Event log, Configuration, Status-log, messages
View all HP 2605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Table 6-9 Status-log messages (continued) Error log code 13.0003 13.0004 13.0005 20.0000 21.0000 50.1000 50.2000 50.3000 50.4000 50.5000 50.6000 52.0000 52.0100 52.0200 52.0300 54.0600 54.1000 54.2800 54.2801 55.0000 55.0001 55.1000 57.0000 57.0001 59.0000 59.0001 101.0000 102.0000 103.0000 Description Paper jam, registration drum area Paper jam, drum fuser area Paper jam, fuser output area Memory out Video under run Low temperature fuser error Slow fuser error High temperature fuser error Fuser heater wire failure Fuser low temperature subtherm failure Fuser high temperature subtherm failure Scanner error, black laser failure Scanner error, cyan laser failure Scanner error, magenta laser failure Scanner error, yellow laser failure Density sensor error Color plane registration sensor error Sensor density contaminated Sensor color plane registration contaminated Engine comm fatal error Engine comm critical error DC controller memory error Fan motor error Fan cartridge failure Paper path/ETB rotation failure Paper path/ETB ramp up failure Color plane registration error DMAX calibration error DHALF calibration error Event log Information for the last five events is available on the Configuration page under the Status log section. For more information, see Configuration page on page 167. For a list of messages that only appear in the event log, see Status-log messages on page 140. 168 Chapter 6 Troubleshooting ENWW