HP 2605 Service Manual - Page 99
ETB removal and replacement, Ready, Incorrect yellow, Incorrect magenta, Incorrect cyan
View all HP 2605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
7. Firmly close the front door. After a short time, the control panel should display Ready. NOTE If a cartridge is in the wrong slot or is the wrong type for the printer, the control panel will display one of the following messages: Incorrect yellow, Incorrect magenta, Incorrect cyan, or Incorrect black. 8. Installation is complete. Place the used print cartridge in the box in which the new cartridge arrived. See the enclosed recycling guide for recycling instructions. 9. If you are using a non-HP print cartridge, check the printer control panel for further instructions. NOTE When replacing or changing a black print cartridge, a cleaning page automatically prints. This helps prevent speckles on the front or back of printed documents. For a more thorough cleaning, see To clean the paper path using HP ToolboxFX on page 37. ETB removal and replacement Use the following procedure to remove the ETB. 1. Remove or slightly pull out Tray 2 (RM1-1916-050CN). ENWW Removal and replacement procedures 89