HP 4150 HP OmniBook 4150 - User's Guide - Page 52
Expanding the OmniBook, User's Handbook
UPC - 725184276088
View all HP 4150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Expanding the OmniBook Using Plug-In Modules 3. Slide the module release latch forward as far as it will go. 4. Gently move the release latch back until the module pops out. 5. Grasp the underside of the module firmly, and pull out. 6. With the latch in the open position, slide the new plug-in module into the OmniBook until flush with the unit. 7. Close the module release latch. If you have a CD-ROM drive or other module in the module bay, you can connect the floppy disk drive to the parallel port. See the section "Using Plug-In Modules" in the online Reference Guide. 52 User's Handbook
Expanding the OmniBook
Using Plug-In Modules
52
User’s Handbook
3.
Slide the module release latch forward as far as it will go.
4.
Gently move the release latch back until the module pops out.
5.
Grasp the underside of the module firmly, and pull out.
6.
With the latch in the open position, slide the new plug-in module into the OmniBook
until flush with the unit.
7.
Close the module release latch.
If you have a CD-ROM drive or other module in the module bay, you can connect the
floppy disk drive to the parallel port. See the section “Using Plug-In Modules” in the
online
Reference Guide
.