HP 4150 HP OmniBook 4150 - User's Guide - Page 83
Press F10 to Save and Exit the BIOS Setup utility.
UPC - 725184276088
View all HP 4150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Troubleshooting Solving Problems If the OmniBook doesn't boot from the floppy disk drive After checking all connections, check the boot order and setup in BIOS Setup utility. 1. From the Start menu, shut down, then restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. 3. Open the Boot menu. The default boot order is Removable Device Hard Disk CD-ROM/DVD Drive 4. If Removable Device is not option 1, use the arrow keys to select Removable Device. 5. Press F6 to move up (or F5 to move down) in the list. 6. If an LS-120 drive is also installed, expand the Removable Device category and move the floppy drive to the first position. 7. In the Security menu, make sure the Floppy Boot setting is Enabled. 8. Press F10 to Save and Exit the BIOS Setup utility. User's Handbook 83