HP 8100 Maintenance and Service Guide: HP Compaq 8100 and 8180 Elite Business - Page 154
Type 2 Battery Holder, Using the Small Form Factor Computer in a Tower Orientation - tower desktop
View all HP 8100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
5. Plug in the computer and turn on power to the computer. 6. Reset the date and time, your passwords, and any special system setups, using Computer Setup. Refer to Computer Setup (F10) Utility on page 8. Type 2 Battery Holder 1. To release the battery from its holder, squeeze the metal clamp that extends above one edge of the battery. When the battery pops up, lift it out (1). 2. To insert the new battery, slide one edge of the replacement battery under the holder's lip with the positive side up (2). Push the other edge down until the clamp snaps over the other edge of the battery. Figure 7-64 Removing the battery from a type 2 holder 3. Replace the computer access panel. 4. Plug in the computer and turn on power to the computer. 5. Reset the date and time, your passwords, and any special system setups, using Computer Setup. Refer to Computer Setup (F10) Utility on page 8. Using the Small Form Factor Computer in a Tower Orientation The Small Form Factor computer can be used in a tower orientation. The HP logo plate on the front bezel is adjustable for either desktop or tower orientation. 1. Prepare the computer for disassembly (Preparation for Disassembly on page 90). 144 Chapter 7 Removal and Replacement Procedures Small Form Factor (SFF) Chassis