HP 8100 Maintenance and Service Guide: HP Compaq 8100 and 8180 Elite Business - Page 71
CAUTION, Removing a 5.25-inch Drive in the Minitower Configuration Optical Drive
View all HP 8100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
4. Remove the drive from the drive bay as follows: ● To remove a 5.25-inch drive in the desktop configuration, press down on the yellow drivelock mechanism (1) and slide the drive from the drive bay (2). CAUTION: When the yellow drivelock is pressed, all the external 5.25-inch drives are released so do not tilt the unit and allow the drives to fall out. Figure 6-29 Removing a 5.25-inch Drive in the Desktop Configuration (Optical Drive shown) ● To remove a 5.25-inch drive in the minitower configuration, pull up on the green drivelock mechanism (1) for that specific drive and slide the drive from the drive bay (2). Figure 6-30 Removing a 5.25-inch Drive in the Minitower Configuration (Optical Drive shown) Drives 61
4.
Remove the drive from the drive bay as follows:
●
To remove a 5.25-inch drive in the desktop configuration, press down on the yellow
drivelock mechanism
(1)
and slide the drive from the drive bay
(2)
.
CAUTION:
When the yellow drivelock is pressed, all the external 5.25-inch drives are
released so do not tilt the unit and allow the drives to fall out.
Figure 6-29
Removing a 5.25-inch Drive in the Desktop Configuration (Optical Drive
shown)
●
To remove a 5.25-inch drive in the minitower configuration, pull up on the green drivelock
mechanism
(1)
for that specific drive and slide the drive from the drive bay
(2)
.
Figure 6-30
Removing a 5.25-inch Drive in the Minitower Configuration (Optical Drive
shown)
Drives
61