HP Brio 83xx HP BRIO 82XX and 83XX Series PCs - Hard Disk Drives - Page 49
Installing an Additional Hard Disk Drive, Installing the Drive
View all HP Brio 83xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
There are two different types of power connectors: Power Connectors for Hard Disk Drives, Tape Drives, 5.25-inch Floppy Disk Drives, CD-ROM Drives, Zip Drives, and 3.5-inch Floppy Disk Drives (some types) 2 Installing Accessories in Your Computer Installing Storage Devices Power Connector for 3.5inch Floppy Disk Drive (some types) Some of the power connectors will be already connected to devices. If you install a device that requires a different connector, the connector converter should be supplied with the device. Installing an Additional Hard Disk Drive Refer to the drive's manual(s) to see if you must set jumpers or if there is a special installation procedure to follow. Note If your new hard disk drive already has a mounting tray attached, you must remove it before you can install the drive in your computer. Installing the Drive 1 Remove the computer's cover (refer to "Removing the Cover" on page 23). 49