HP Disk System 2300 HP StorageWorks Disk System 2300 User's Guide(This manual - Page 117
extraction handle., Press the cam latch B toward the end of the extraction handle to loosen
View all HP Disk System 2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Removal and Replacement Caution Replace the disk module or filler immediately (see next step). Caution Touching the disk circuit board can cause high energy discharge and permanently damage the disk. Disk modules are fragile. Handle carefully. 3 Remove the replacement disk module from its ESD bag, being careful to grasp the disk module by its extraction handle (see Figure 53). (Fillers are not in ESD bags.) 4 Press the cam latch (B) toward the end of the extraction handle to loosen the extraction handle. When you are installing a disk module filler, align the disk filler guides with the chassis rails and insert the filler. Push the filler in until it stops. When it is fully inserted, it will be flush with the rest of the disk modules/disk module fillers. 5 Slide the disk module, capacity label up (C), into the empty slot. Removal and Replacement 117