HP Disk System 2300 HP StorageWorks Disk System 2300 User's Guide(This manual - Page 39
Installing PDUs,
View all HP Disk System 2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Installation Installing PDUs The 19-inch PDUs and PDRUs can be installed vertically or horizontally in the rack. Choose PDU/PDRU locations with the following guidelines in mind: ■ Place PDU/PDRUs within the reach of disk system cords. ■ Place PDU/PDRUs vertically whenever possible. See sample installations in Figure 12 and Figure 13. Installing PDU/PDRUs horizontally interferes with the ability to service disk systems that are behind the PDU/PDRU. ■ Place vertical PDU/PDRUs on each side of the disk system so that the cord from either power supply does not cross over replaceable components in the middle of the product. ■ To achieve maximum density in 2-meter racks, install 30-amp PDRUs on hinged brackets directly behind disk systems. Hinges allow the PDRU (HP E7681A and E7682A) to swing aside for servicing obscured components. (See Figure 13.) Installation 39