HP Disk System 2300 HP StorageWorks Disk System 2300 User's Guide(This manual - Page 121

see Isolating Causes in Tighten the locking screws B

Get HP Disk System 2300 PDF manuals and user guides View all HP Disk System 2300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 121 highlights

Removal and Replacement 10 Watch the BCC Fault LED (B in Figure 55). It should come on briefly and then turn off. If the LED stays on and a buzzer sounds, the switch settings do not match the settings on the peer BCC. For other solutions to a BCC fault, see "Isolating Causes" in Chapter 4. 11 Tighten the locking screws (B in Figure 54). 12 Reattach the SCSI cable and terminator. Caution The BCC must be replaced or a filler panel installed in the open slot to ensure proper cooling for the disk system. Removal and Replacement 121

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
Removal and Replacement
121
Removal and Replacement
10
Watch the BCC Fault LED (B in Figure 55). It should come on briefly and
then turn off. If the LED stays on and a buzzer sounds, the switch settings do
not match the settings on the peer BCC. For other solutions to a BCC fault,
see “Isolating Causes” in Chapter 4.
11
Tighten the locking screws (B in Figure 54).
12
Reattach the SCSI cable and terminator.
Caution
The BCC must be replaced or a filler panel installed in the open
slot to ensure proper cooling for the disk system.