HP Disk System 2300 HP StorageWorks Disk System 2300 User's Guide(This manual - Page 146
AC Power Input, Heat Output, Environment, Altitude:3000 m 10, 000 ft.
View all HP Disk System 2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
AC Power Input The disk system operates at 100-127 and 200-240 V AC, 50-60 Hz, single phase, power factor corrected. Maximum current is 4.8 amps over the low voltage range and 2.0 amps over the high voltage range. Average power consumption with medium load (14 disks running idle) is 345 watts. DC Power Output ■ Disk: +5 V and +12 V from power supply ■ BCC: +5 V and +3.3 V from power supply Heat Output 1600 BTU/hr. Environment The following environmental specifications were type-tested under controlled conditions. Hewlett-Packard maintains an active program of auditing production products to make sure these specifications remain true when products are retested under the same conditions. However, the limits of these specifications do not represent the optimum for long, trouble-free operation and specifically are not recommended for maximum satisfaction. The recommended conditions are stated when appropriate. ■ Operating temperature: 5º C to 38º C (41º F to 100º F) Recommended: 20º C to 25.5º C (68º F to 78º F) ■ Storage temperature: -40º C to 70º C (-40º F to 158º F) ■ Maximum gradient: 20º C per hour (36º F per hour) ■ Relative humidity:10% to 80% noncondensing, max. wetbulb at 28º C Recommended:30% to 50% noncondensing ■ Altitude:3000 m (10,000 ft.) Note For continuous, trouble-free operation, the disk system should NOT be operated at its maximum environmental limits for extended periods of time. Operating within the recommended operating range, a less stressful operating environment, ensures maximum reliability. 146 Reference