HP Disk System 2300 HP StorageWorks Disk System 2300 User's Guide(This manual - Page 50
rail kit require 3 EIA units of space.
View all HP Disk System 2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
3. Locate a place on the rack columns with the available space required for the installation of the storage device. The storage device and the rail kit require 3 EIA units of space. Use the following table as a guide for placement of the rails in a Rack System/E where multiple disk systems will be installed. You can rack multiple disk systems without gaps installing rails every three EIA units. For example, starting at the bottom of a 2-meter rack, set rails at the following unit/hole locations: Table 7 Rail Positions for Sequential Disk Systems Disk Systems Hole from Rack Bottom One 1 Two 4 Three 7 Four 10 Five 13 Six 16 Seven 19 Eight 22 Nine 25 Ten 28 Eleven 31 50 Installation
50
Installation
3.
Locate a place on the rack columns with the available space required
for the installation of the storage device. The storage device and the
rail kit require 3 EIA units of space.
Use the following table as a guide for placement of the rails in a Rack System/E
where multiple disk systems will be installed. You can rack multiple disk systems
without gaps installing rails every three EIA units. For example, starting at the
bottom of a 2-meter rack, set rails at the following unit/hole locations:
Table 7
Rail Positions for Sequential Disk Systems
Disk Systems
Hole from Rack Bottom
One
1
Two
4
Three
7
Four
10
Five
13
Six
16
Seven
19
Eight
22
Nine
25
Ten
28
Eleven
31