HP Disk System 2300 HP StorageWorks Disk System 2300 User's Guide(This manual - Page 129
Tighten the three Torx T10 screws., Reinstall the disk system in the rack. See
View all HP Disk System 2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Removal and Replacement To reinstall the top cover: 1 Insert the edge of the top cover under the outer sheet metal of the chassis. 2 Slide the cover toward the middle of the chassis, making sure to rotate the top cover down to align with the edges of the chassis. 3 Insert the three Torx T10 screws through the holes as shown in Figure 59. 4 Tighten the three Torx T10 screws. 5 Reinstall the disk system in the rack. See page 125. 6 Reinstall the disk system retention screws to secure the disk system. 7 Reinstall the power supply/fan modules. Removal and Replacement 129
Removal and Replacement
129
Removal and Replacement
To reinstall the top cover:
1
Insert the edge of the top cover under the outer sheet metal of the chassis.
2
Slide the cover toward the middle of the chassis, making sure to rotate the top
cover down to align with the edges of the chassis.
3
Insert the three Torx T10 screws through the holes as shown in Figure 59.
4
Tighten the three Torx T10 screws.
5
Reinstall the disk system in the rack. See page 125.
6
Reinstall the disk system retention screws to secure the disk system.
7
Reinstall the power supply/fan modules.