HP Disk System 2300 HP StorageWorks Disk System 2300 User's Guide(This manual - Page 131

Stand the new midplane inside the chassis and push it over the alignment

Get HP Disk System 2300 PDF manuals and user guides View all HP Disk System 2300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 131 highlights

Removal and Replacement 3 To remove the midplane: a Loosen the cam handle locking screws and pull power supplies free of the midplane (see page 123). b Loosen the cam handle locking screws and pull the BCCs free of the midplane. c Remove the disk modules and fillers from the chassis. d Remove the light pipes (see Figure 60 on page 132) from the chassis. e Remove the power switch extender arm. f Remove the eight Torx T15 screws along the top and bottom edges of the midplane (see Figure 60). g Pull the midplane forward to clear alignment pins and lift it up and out of the disk system. 4 To replace the midplane: a Stand the new midplane inside the chassis and push it over the alignment pins. Adjust the final position of the midplane as necessary for optimal connections to power supply/fan modules, BCCs, and disk modules. b Insert and tighten eight screws into the midplane and chassis. c Replace the light pipes. d Replace the power switch extender arm. 5 Replace the top cover. See page 128. 6 Reseat and secure the BCCs (see page 119). 7 Reseat and secure the power supplies (see page 123). 8 Reinstall the disk modules and fillers. Removal and Replacement 131

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
Removal and Replacement
131
Removal and Replacement
3
To remove the midplane:
a
Loosen the cam handle locking screws and pull power supplies free of the
midplane (see page 123).
b
Loosen the cam handle locking screws and pull the BCCs free of the
midplane.
c
Remove the disk modules and fillers from the chassis.
d
Remove the light pipes (see Figure 60 on page 132) from the chassis.
e
Remove the power switch extender arm.
f
Remove the eight Torx T15 screws along the top and bottom edges of the
midplane (see Figure 60).
g
Pull the midplane forward to clear alignment pins and lift it up and out of
the disk system.
4
To replace the midplane:
a
Stand the new midplane inside the chassis and push it over the alignment
pins. Adjust the final position of the midplane as necessary for optimal
connections to power supply/fan modules, BCCs, and disk modules.
b
Insert and tighten eight screws into the midplane and chassis.
c
Replace the light pipes.
d
Replace the power switch extender arm.
5
Replace the top cover. See page 128.
6
Reseat and secure the BCCs (see page 119).
7
Reseat and secure the power supplies (see page 123).
8
Reinstall the disk modules and fillers.