HP LH4r HP NetServer FCArray Assistant - Installation and User Guide - Page 117
Creating an Analysis String
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Chapter 5 Monitoring You build an analysis string, which defines a line of data on a line graph, a section of a pie graph, or a bar on a bar graph. Each string consists of one or more controllers, channels, and physical devices or logical drives to include in the analysis, an operation to be analyzed, and a color and line style (for line graphs) to represent this string graphically. NOTE The lower window in each Statistics View tab (Settings, Line, Pie, and Bar) is the display window where the defined analysis strings are listed. If the display window is blank, no active defined analysis strings currently exist. When new strings are created, each one appears in the display window. Creating an Analysis String To build an analysis string, refer to the following procedure (see Figure 5-15). 1. In Device type, select Physical devices or Logical drives to build an analysis string. 2. In Device Selection group, under Controllers, select one or more controllers to include in the analysis string. ◊ Click All for all controllers. ◊ For individual controllers, ensure All is not highlighted. 3. Under Channel, select one or more channels to include in the analysis string. ◊ Click All for all channels. ◊ For individual channels, ensure All is not highlighted. 4. If you chose Physical under Device type, select one or more targets to include in the analysis string. ◊ Click All for all targets. ◊ For individual targets, ensure All is not highlighted. 5. If you chose Logical under Device type, select one or more logical drives to include in the analysis string. ◊ Click All for all logical drives. ◊ For individual logical drives, ensure All is not highlighted. At the bottom of the Device Selection box, a field displays the analysis string being constructed. The symbol * refers to All. 111