HP LH4r HP NetServer FCArray Assistant - Installation and User Guide - Page 94
If you selected Add Logical Drive, skip to the Add Logical Drive
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Chapter 4 Configuration ◊ Add Logical Drive (or Add LUN) - This option adds additional physical drives in an existing single or multiple LUN array. It may also be used to add new logical drives to increase the number of LUN arrays. The RAID level of the existing Logical Drives may change to accommodate re-striping. The existing array can not be spanned or contain more than 7 physical drives and must contain only one logical drive. Data integrity is maintained during this process. 7. If you selected Add Logical Drive, skip to the Add Logical Drive procedure in the next section to continue. The Add Logical Drive button takes you to the Logical Drives tab in Manual Configuration. The referenced procedure provides the instructions for configuring the disk arrays into logical drives. 8. If you selected Expand Logical Drive, continue with the step 9. The Manual Configuration/Expand Logical Drive dialog box appears. See Figure 4-51. 9. Select an unused drive and drag it to next available square in line with the Disk Arrays A0 section. The drive will be part of a disk array referred to as "A0." See Figure 4-51. Figure 4-51. Expand Logical Drive Dialog Box After the unused drive is dropped into the existing Array, the Apply button becomes active (armed). See Figure 4-52. 88