HP LH4r HP Netserver LH 3/r and LH 4/r Mass Storage Kit - Page 18
Remove two screws securing the left recessed bracket to the rack
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Chapter 2 Installation 3. Clips attach the front bezel to the NetServer chassis. To remove the bezel, simply pull it toward you until it comes free, as shown in Figure 2-6. Figure 2-6. Remove Front Bezel from NetServer in Compaq Rack 4. Unscrew the NetServer chassis from the Compaq rack, as follows: a. Remove two screws securing the left recessed bracket to the rack column, as shown in Figure 2-7. Do not unscrew the bracket from the NetServer. b. Remove two screws securing the right recessed bracket to the rack column, as shown in Figure 2-7. Do not unscrew the bracket from the NetServer. 14
Chapter 2
Installation
14
3.
Clips attach the front bezel to the NetServer chassis. To remove the bezel,
simply pull it toward you until it comes free, as shown in Figure 2-6.
Figure 2-6. Remove Front Bezel from NetServer in Compaq Rack
4.
Unscrew the NetServer chassis from the Compaq rack, as follows:
a.
Remove two screws securing the left recessed bracket to the rack
column, as shown in Figure 2-7. Do not unscrew the bracket from the
NetServer.
b.
Remove two screws securing the right recessed bracket to the rack
column, as shown in Figure 2-7. Do not unscrew the bracket from the
NetServer.