HP LH4r HP Netserver LH 3/r and LH 4/r Mass Storage Kit - Page 27
For a NetServer in a Rack
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Chapter 2 Installation For a NetServer in a Rack Do the following to remove the fan assemblies from an HP NetServer in a rack: 1. Disconnect the fan cables from the Fan 0 and Fan 1 connectors on the system backplane. These connectors are shown in Figure 2-13 for the HP NetServer LH 3. Fan 1 Assembly Fan 1 Cables Catch Fan 0 Assembly Catch Figure 2-14. Remove Fan Assemblies from NetServer in Rack Configuration (Shown for HP NetServer LH 3r; Details of Fan Cables May Vary) 23
Chapter 2
Installation
23
For a NetServer in a Rack
Do the following to remove the fan assemblies from an HP NetServer in a rack:
1.
Disconnect the fan cables from the Fan 0 and Fan 1 connectors on the
system backplane. These connectors are shown in Figure 2-13 for the
HP NetServer LH 3.
Fan 1 Assembly
Fan 0 Assembly
Catch
Fan 1 Cables
Catch
Figure 2-14. Remove Fan Assemblies from NetServer in Rack Configuration
(Shown for HP NetServer LH 3r; Details of Fan Cables May Vary)