HP LH4r HP Netserver LH 3/r and LH 4/r Mass Storage Kit - Page 8
Precautions
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Chapter 1 Introduction Precautions Follow the procedures listed below to ensure safe handling of components and to prevent harm to both you and the NetServer: WARNING Hazardous voltages and high energy levels are present inside the NetServer. ALWAYS disconnect the AC power cord(s) from the NetServer before removing the cover. Serious injury may result if this warning is not observed. WARNING To prevent the rack from tipping over, extend the anti-tip foot or attach the anti-tip feature before extending the NetServer from the rack. Also lower the leveler feet of the rack to improve stability and to prevent the rack from rolling. Failure to use the anti-tip foot or feature and the leveler feet could result in serious injury. CAUTION This accessory is sensitive to static electricity and can easily be damaged by improper handling. Use of a grounding strap is recommended. Read the following information carefully before you handle the accessory: • Leave the accessory in the antistatic container until you are ready to install it. • Use an antistatic service kit, such as 3M® 8501/8502/8505 or equivalent. • Before you remove the accessory from the antistatic container, touch a grounded, unpainted metal surface on the system to discharge static electricity. 4