HP LH4r HP Netserver LH 3/r and LH 4/r Mass Storage Kit - Page 52
Verify SCSI B Channel Control, Verify Boot Order
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Chapter 3 Configure Mass Storage Verify SCSI B Channel Control 4. When the Setup Utility menu is displayed, look for the following items: Integrated HP NetRAID [ ] Included SCSI_A Channel [ ] Included SCSI_B Channel [ ] Read the values in the brackets to determine whether the integrated HP NetRAID controller is enabled, and for which SCSI channels. ◊ To verify the factory default settings, see that all of the following are true: ∗ Integrated HP NetRAID is set to "Enabled." ∗ Included SCSI_A Channel is set to "Yes." ∗ Included SCSI_B Channel is set to "No." ◊ To disable the integrated HP NetRAID controller: Use the up and down arrow keys to highlight "Integrated HP NetRAID." Then use the +/- keys to disable it. This disables the integrated HP NetRAID controller for both SCSI channels. ◊ To exclude the SCSI A Channel from the integrated HP NetRAID controller: Use the up and down arrow keys to highlight "Included SCSI_A Channel." Then use the +/- keys to change the value to "No." ◊ To exclude the SCSI B Channel from the integrated HP NetRAID controller: Use the up and down arrow keys to highlight "Included SCSI_B Channel." Then use the +/- keys to change the value to "No." NOTE Write your settings here for future reference: • Integrated HP NetRAID [ ] • Included SCSI_A Channel [ ] • Included SCSI_B Channel [ ] Verify Boot Order 5. Press the right arrow key twice to select the Configuration menu. 48