HP LH4r Integrated HP NetRaid Controller Configuration Guide - Page 118
When HP NetRAID Assistant starts, the Main Screen only lists
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Chapter 11 Troubleshooting Can't unload raidserv.nlm If an integrated HP NetRAID controller (or HP NetRAID Series adapter) in a NetWare server is being accessed by a configuration utility (HP NetRAID Assistant in Full Access mode or HP NetRAID Config), the raidserv.nlm module cannot be unloaded until the controller or adapter is no longer being accessed. This prevents a critical operation in the controller or adapter, such as a disk rebuild, from being interrupted. HP NetRAID Assistant does not list any servers when started (other than "local") When HP NetRAID Assistant starts, the Main Screen only lists "(Local)" in the pull-down list of servers. The Registration Server may be down, or no servers may have checked in with it. Be sure that the Registration Server is working and that it started before the other servers. Servers can only log into the Registration Server when the access server (NT) or raidserv.nlm (NetWare) executes. 112