HP LH4r Integrated HP NetRaid Controller Configuration Guide - Page 65
Make NOS-specific Configuration Utility Diskette
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Chapter 6 HP NetRAID Software 1. Turn on the HP NetServer and monitor, and insert the HP NetServer Navigator CD-ROM into the drive. Turn off the HP NetServer power, wait 10 seconds, and turn it back on again. 2. From the HP Navigator Main Menu, choose Configuration and Installation Assistant. 3. From the Configuration Assistant menu, choose Custom. 4. From the Gather Information window, choose your NOS. If necessary, also select your version of the NOS. 5. When you see the message, "Would you like to use HP's automated mode of NOS installation?" click No. 6. From the Custom Configuration menu, choose Create Driver Diskette(s). 7. From the Create Driver Diskette(s) window, choose Create Driver Diskette(s). Select the diskette to create, click Execute, and follow the onscreen instructions. 8. When the driver diskette is complete, click Back to return to the Custom Configuration menu. 9. From the Custom Configuration menu, choose Show NOS Installation Instructions. 10. On the Show NOS Installation Instructions window, click Save to Disk. Later in these procedures, you will print the Network Operating System Installation Instructions. 11. Click Back to return to Configuration Assistant, and click Back again to return to the Main Menu. Do not exit the HP NetServer Navigator system, because in the next step, you will create the NOS-specific configuration diskette. Make NOS-specific Configuration Utility Diskette You must make another diskette containing the NOS-specific configuration utility. To create the diskette needed to install the NOS-specific utility for Windows NT or Novell NetWare: 1. From the HP Navigator Main Menu, choose NetServer Utilities. 2. Select More NetServer Utilities, then choose Diskette Library. 3. From the Diskette Library, do the following: 59